Foot Decking Roof Roll Forming Machine Lifetime Repair Guarantee
Our products Foot Decking Roof Roll Forming Machine are widely used in various fields: industrial factory, civilian building, warehouse, easy steel building, manufacturing, construction and have features such as nice appearance and durable.
Machine Specification:
| 1 | Item | Parameters |
| 2 | Model NO. | BT258259 |
| 3 | Material | Pre-painted galvanized sheet |
| 4 | Thickness | 0.7-1.2 mm |
| 5 | Yield Strength | 350 MPa |
| 6 | Feed Width | 1220 mm |
| 7 | Effective width | 900 mm |
| 8 | Roll Stages | 28 Stages |
| 9 | Shafts Diameter | ф95 mm |
| 10 | Main Motor Power | 15 KW |
| 11 | Hydraulic Group Power | 5.5KW |
| 12 | Max. Line Speed Of Roll Former | Approx.15 m/min |
| 13 | Electric Standard | According to local voltage |
De-coiler—→Entry Bench —→Main roll forming machine—→PLC Control System —→Hydraulic cutting—→ Run out table
Descrption of some parts lines
A. 5 Ton X 1250 Hydraulic Un-coiler With Coil Car
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Load capacity = Max.5Tons
Coil Inner-diameter= 510±30 mm, Coil width = Max.1250mm
Automatic stopping device with limited switch as assistance to control stop/star rotation
5 Tons coil car
Up/Down stroke of Coil Car: Max. 350mm;
Forward/backward stroke of Coil Car: Max. 2000mm
[Decking Floor Cold Roll Forming Machine for Yx45-150-900 Building Construction]
B. Entry bench and manual pre-shearing device
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness up to 1 mm
C. Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving;28 stages to form
Wall-plate frame design
Rollers manufactured from 45#, hard chrome coating
Shafts Diameter=ф95mm, Precision Machined
Main motor =15KW*2, Frequency speed control
Max line speed of roll former: Approx.15m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
D. Hydraulic Cutting Device
Stop to cut, Post cut, No Blanking cut
Cutting tool material : Cr12Mov, Heat treatment;
Pump motor =5.5KW
E. PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider), Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
| Our Service |
| 1 | One-year quality assurance for all the machine |
| 2 | Technical staff available to service machine overseas |
| 3 | Permanent free for technical support |
| 4 | Design and produce according to your sample or drawing |
Product Tags:
|
|
Warehouse Floor Deck Roll Forming Machine / Roof Sheet Forming Machine Images
|
